Setup

It is strongly recommended that all GigE imagers be connected directly to a gigabit Ethernet port which supports Jumbo frames.

Jumbo packet support must often be manually enabled. In Windows 10:

1. Right-click the start menu and select Device Manager, or type "Device Manager" in the search box.
2. In the Device Manager click on Network Adapters, right-click your wired network adapter and choose Properties.
3. In the Advanced tab click Jumbo Packet and set the Value to ~9000 Bytes. If your adapter only supports smaller jumbo packets, choose the maximum supported packet size.
4. Click OK and close the Device Manager.